undefined
+
  • undefined

Valve full performance testing machine

YFB-D40 "600LB screw cylinder valve test bench is an integrated equipment for opening and closing torque test. The left side of the main body of the equipment is equipped with a top pressure oil cylinder, and the right side is equipped with a top pressure screw nut pair, both of which drive a mobile archway to press the blind plate on both ends of the valve. The thrust of the oil cylinder of the equipment can reach 1600t (under 25MPa oil pressure), and the designed load bearing capacity (medium thrust) is 1800t. The test medium is water or gas, and the valve shell test and sealing test can be carried out respectively. High and low pressure water and gas system can be connected with the blind plate water channel at both ends of the valve, respectively, filling pressure from both ends

Key words:

Key words:Zirconium,Pump

Product Consulting:

Product Description

YFB-D40 "600LB screw cylinder valve test bench is an integrated equipment for opening and closing torque test. The left side of the main body of the equipment is equipped with a top pressure oil cylinder, and the right side is equipped with a top pressure screw nut pair, both of which drive a mobile archway to press the blind plate on both ends of the valve. The thrust of the oil cylinder of the equipment can reach 1600t (under 25MPa oil pressure), and the designed load bearing capacity (medium thrust) is 1800t.
The test medium is water or gas, and the valve shell test and sealing test can be carried out respectively. High and low pressure water and gas system can be connected with the blind plate water channel at both ends of the valve, respectively, from both ends of the filling pressure medium (water or gas) and pressure relief. At the same time, it is equipped with high and low pressure water circuit and gas circuit system that can feed pressure from the middle chamber of the valve, and leak detection can be carried out at both ends of the valve when feeding pressure from the middle chamber. At least 42MPa (air source pressure ≥ 0.6MPa) strength test can be met.
Main parameters of equipment:
1. Test valve range: 16-24 "(300Ib-1500 Ib)
                28-32〞 (300Ib-900 Ib)
                36-40〞 (300Ib-600 Ib)
2. Blind distance: maximum 3120mm minimum 810mm
3. Test valve length: 838-2920mm
4. Maximum outer diameter of test valve: φ1650
5. Equipment center height: 1260mm
6. Total weight of equipment: ≈ 60t

Product inquiry

Note: Please leave your mobile phone and email address, our professionals will contact you as soon as possible!